Setting up a lobby
 

For setting up CMS lobby you need to have a PC connected to FOIS network. If this is available you can start to set up a CMS lobby without waiting for CRIS hardware or the proper network LAN to be setup. The lobby for a CMS system can be set up in following step :-

  1. Setting up a NCMS lobby.
  2. Entering Referential Data - For details refer Configure a lobby
  3. Ensure that you have a trained CORE implementer trained by CRIS. Consult CAO/NR for more information.
  4. Ensure that you have 3 KIOSK and 4 Thin client on a Network properly commissioned with a reliable Network and a Electrical power system with proper earthing having capability to come on standby power supply within 5 min of the electricity board power failures.
  5. Confirm to CRIS that the lobby setup is complete as explained in site readiness checklist
  6. Start using the CMS system with the support of CMS help, Your CORE implementer and C3 helpdesk support

  •  

    		•