HOW DO I BRING A NCMS LOBBY SYSTEM ONLINE?
 

NCMS lobby or Non Crew Management System Lobby is a lobby which is primarly aimed at Entering th refrential data of CMS like Crew Bio Data, Loco Inspector bio data etc. Refer the section Overview >> Configure a lobby for more informations.

Ensure that you have a proper FOIS connection with a PC with preferably mozilla fire fox installed on it as default browser at the Lobby desiring to enter the data into the CMS system.

  1. Obtain an IP address from CMS Control Center (C3) contact number 7217709646, 011-26886120. Railway Number 54824.
  2. Insert the following setting of the network configuration in your TCP/IP settings
    • IP address as already circulated or confirmed by CRIS in point 2.
    • Subnet Mask 255.255.255.0
    • Default Gateway Shall be given by the Telecom department of Railways.
  3. In case of problems in configure your PC with the IP address contact C3 for voice support and configuring your PC.
  4. Do pinging of network by going to start -> Run enter and press OK
  5. Short normal pinging. ping 10.60.200.168. If time < 75 ms network is good. Continuous extensive regular pinging. ping 10.60.200.168 -t. If time < 75 ms network is good. Short extensive pinging. ping 10.60.200.168 –l 1000.If time < 170 ms network is good. Continuous extensive regular pinging. ping 10.60.200.168 – l 1000 -t. If time < 170 ms network is good.
  6. Confirm the ping results to C3.
  7. Enter address http:// 10.60.200.168/ and press enter.
  8. Enter address http:// 10.60.200.168/CMSHELP to go to the CMS introduction and support website. Read the instructions on the CMSHELP website for further action.
  9. Obtain a letter from DRM of your division for nomination of one configuration manager for CMS or the super user and come to CRIS for 2 day support training for the super user with prior appointment. These super users shall be one per lobby and shall come prepared for making routes and yards of their sections.
  10. Configure the fire fox explorer as per the voice assistance of C3 for best result of CMS software.
  11. Open the fire fox from start -> program ->
  12. Enter the following in the address bar http:// 10.60.200.168/CMS
  13. Crew management system User Login screen shall open.
  14. Enter User name and password as given by CRIS to into CMS system.
  15. Consult you assigned CORE Implementer for further guidance within the CMS software.